Menü überspringen

TL Micro 150/200/300

Request

Specifications

TL Micro 150

TL Micro 200

TL Micro 300

Tool diameter

Central measurement

Tangential measurement from above

Tangential measurement from the side

0.03 mm to 30 mm

0.03 mm to 30 mm

0.03 mm to 30 mm

0.1 mm to 80 mm

0.1 mm to 98 mm

0.1 mm to 122 mm

0.1 mm to 180 mm

0.1 mm to 324 mm

0.1 mm to 428 mm

Repeatability

± 0.2 µm

± 1 µm

Spindle speed*

For individual tooth measurement, optimized to standard spindles or HSC spindles (> 30 000 rpm)

Laser

Visible red-light laser with beam focused at center of system

Wavelength/Power

630 nm bis 700 nm/< 1 mW

Protection class IEC 825

2

Input signals

Square-wave signals 24 V DC

  • Enable transmitter ENABLE 0
  • Enable 1 to receiver ENABLE 1
  • Enable 2 to receiver ENABLE 2

Output signals

Square-wave signals 24 V DC

  • Dynamic triggering signal DYN
  • Static triggering signal STA
  • Proper laser function LASER OK

Voltage supply

24 V DC / 160 mA

Electrical connection*

M23 flange socket (male), 12-pin, either on the side or bottom

Mounting

Within the machine work envelope

Protection EN 60 529

IP68 (when connected, with sealing air)

Tool cleaning

Blower

Operating temperature

Storage temperature

10 °C to 40 °C

0 °C to 50 °C

Mass

Including blower

Cable outlet lateral

Approx. 0.85 kg

Approx. 0.95 kg

Approx. 1.15 kg

Cable outlet downward

Approx. 0.90 kg

Approx. 1.00 kg

Approx. 1.20 kg

* Please select when ordering